Example description
DESCRIPTION
===========
This example project shows how to use the IAR Embedded Workbench
for ARM to develop code for the IAR STM32-SK board. It shows basic
use of the parallel I/O, the timer, the interrupt controller, the ADC and the
interface to LCD HD44780 compatible module.
It show the position of on the board potentiometer in percents.
COMPATIBILITY
=============
The LCD_Demo example project is compatible with IAR-STM32-SK
evaluation board. By default, the project is configured to use the
J-Link JTAG/SWD interface.
CONFIGURATION
=============
Make sure that the following jumpers are correctly configured on the
IAR STM32-SK evaluation board:
Jumpers:
PWR_SEL - depending of power source
GETTING STARTED
===============
1) Start the IAR Embedded Workbench for ARM.
2) Select File->Open->Workspace...
Open the following workspace:
\arm\examples\ST\
STM32F10x\IAR-STM32-SK\LCD_Demo\LCD_Demo.eww
3) Run the program.
The LCD Demo application is downloaded to the Embedded RAM or
Embedded Flash memory depending of configurations on the evaluation
board and executed.